How to Wear Internally Threaded Flatback Earrings: Your FAQ Guide
If you’ve just bought your first pair of internally threaded flatback earrings, you might be wondering: How do I actually put them in? Don’t worry — it’s easier than it looks. Plus, every purchase of our flatback earrings comes with a free insertion tool to make the process even smoother.
Below we answer the most common questions about wearing, removing, and caring for your flatback earrings — with or without the tool.
1. What is an internally threaded flatback earring?
An internally threaded flatback earring has a flat disc that sits against the back of your earlobe (or cartilage). The post (the part that goes through your piercing) has threads on the inside. The decorative front piece has a tiny screw that twists into the post. This design is more secure and comfortable than butterfly backs, especially for sleeping or wearing with masks.
2. Do I really need an insertion tool to put them in?
Not at all. The insertion tool makes it easier and faster, but you can absolutely wear your flatback earrings without one. Many people use their fingers or a simple alternative method (see FAQ #5). However, since every purchase includes a free insertion tool, we recommend giving it a try — especially for smaller studs or hard‑to‑reach piercings like cartilage.
3. How do I wear them with the insertion tool? (Step by step)
Using the included tool is the safest and most hygienic way to insert your flatback earrings. Here’s how:
1. Sanitize – Wash your hands and clean the earring, post, and insertion tool with piercing aftercare solution or rubbing alcohol.
2. Screw the post into the tool – Take the flatback post (the plain metal rod with threads inside one end) and gently twist it into the tip of the insertion tool until it’s snug.
3. Insert the post through your piercing – From the back of your ear, push the tool (still attached to the tool) all the way through until the flatback disc rests against the back of your ear.
4. Remove the tool – Simply unscrew the insertion tool from the front. The post will stay in place.
5. Attach the front piece – Hold the flatback steady with one finger behind your ear. With your other hand, unscrew the tool and screw the decorative front piece into the post from the front. Turn clockwise until it feels snug — do not overtighten.
✅ That’s it! The tool acts like an extra “finger” to guide the tiny post without dropping it.
4. How do I wear them without an insertion tool?
If you don’t have the tool handy (or just want to use your hands), follow these steps:
1. Clean everything – Same as above: clean hands, earrings, and the piercing area.
2. Hold the flatback post – Pinch the flat disc firmly between your thumb and index finger.
3. Insert from the back - Insert the post from the back of your ear (flat disc against the back of your ear), then screw the front piece on from the front.
4. Push the post through – Gently guide the post into the piercing hole. If it gets stuck, twist slightly or apply a drop of water‑based lubricant (like piercing saline spray).
5. Screw on the front piece – Once the post is fully through, hold the flat disc steady with one finger behind your ear. With your other hand, screw the decorative top onto the post (clockwise). Tighten until it feels secure — not too tight.
💡 Pro tip: If you have long nails or limited dexterity, the insertion tool is a lifesaver. But with a little practice, fingers work just fine.
5. How do I remove my flatback earrings?
Removal is the reverse of insertion: Hold the flat disc at the back with one hand. With your other hand, unscrew the front piece by turning it counter‑clockwise. Once it’s off, slide the post out.
7. Is the insertion tool reusable? How do I clean it?
Absolutely. The tool is made of titanium and can be reused hundreds of times. Clean it after each use with:
-Soap and warm water, or
-Piercing aftercare saline solution, or
-Rubbing alcohol (let it air dry completely)
Never share your insertion tool with another person to avoid cross‑contamination.
8. Why do you include a free insertion tool with every purchase?
We believe that changing earrings should be easy, hygienic, and frustration‑free. Many people struggle with tiny threaded posts, especially for cartilage or daith piercings. The tool eliminates fumbling, reduces the risk of dropping small parts, and helps you keep your hands away from the piercing hole (which is cleaner).
So yes — every single flatback earring order comes with a free insertion tool. No need to buy one separately.
9. Can I sleep with internally threaded flatback earrings?
Yes! That’s one of their main benefits. The flat disc sits flush against your skin, so it doesn’t poke or dig in while you sleep. Just make sure the front piece is tightened enough that it won’t loosen overnight — but not so tight that it irritates your piercing.
10. What if I lose the insertion tool?
Don’t worry. You can still wear your earrings using your fingers (see FAQ #4). And if you really miss the tool, just contact our customer service — we’ll be happy to help you get a replacement.
Final Tip: Practice Makes Perfect
The first time you try internally threaded flatback earrings, it might take a few extra seconds. That’s normal. After two or three changes, you’ll be able to do it in under a minute — tool or no tool.
Remember: Every pair comes with a free insertion tool, so you’re never left guessing. Happy piercing styling!
— Written by Nic(Founder)